The Source Professional Factory Company Designs Steam Exhaust Muffler

Description:The Source Professional Factory Company Designs Steam Exhaust Muffler - China Steam Muffler and Muffler

The Source Professional Factory Company Designs Steam Exhaust Muffler
Product Description

steam silencer

The steam muffler is mainly used for the effective silencing of boiler steam emission and other gas silencing emissions in electric power, petroleum, chemical industry, metallurgy, textile and other industries. It is an important measure to eliminate steam emission noise. All kinds of boiler exhaust steam not only has high temperature and high pressure, but also has a wide emission frequency band. To measure the quality of steam exhaust muffler, the following three aspects are mainly considered:

1. The noise elimination capacity of boiler steam muffler can meet the requirements of Noise Standard for Industrial Enterprises. 2. Mufflers can adapt to different frequencies, high temperatures and pressures (low, medium and high pressure, ultra-high pressure, subcritical and supercritical).
3. The muffler has good structure (reasonable size, high strength, long service life and convenient installation).

1,Introduction of JSTK Steam Muffler
The small hole muffler is composed of a straight pipe with a closed end and a shell, and many small holes are drilled in the pipe wall and shell. The principle of orifice muffler is based on the frequency spectrum of jet noise. If the total area of the nozzle is kept unchanged and many small nozzles are used instead, when the airflow passes through the orifice, the frequency spectrum of jet noise will move to high frequency or ultra-high frequency, which will obviously reduce the audible sound components in the frequency spectrum, thus reducing the interference and harm to people.

Small hole muffler has the advantages of simple structure, light weight and convenient installation.
Installation mode of small-hole muffler: Because of its light weight, small-hole muffler only needs to weld pipes or connect them with flanges when installing

2,Introduction to new high efficiency I(JSTB) steam muffler
The new high efficiency type I muffler refers to a muffler that properly combines sound absorption and acoustic reflection. The noise transmitted along the pipeline is attenuated with distance, and at the same time through the noise in the cross-sectional area of the pipeline, the sound waves of certain frequencies transmitted along the pipeline are reflected back in the direction of the sound source at the mutation, so as to achieve the purpose of silencing.
The new high efficiency type I muffler is an effective combination of dilated muffler and impedance sound absorbing material through an appropriate structure. It can effectively eliminate low, medium, and high frequency noise.
The installation of the new high-efficiency type I muffler is very simple. The branch ear or base is bolted to the corresponding position and the pipe is connected(welding or flange connection).

3,Introduction to New High Efficiency Type II(JSTA) Steam muffler
The new invention patented muffler is a new type of structural muffler developed by our company. The shape structure is similar to that of ordinary compound muffler. The difference is that the bottom of the muffler is equipped with the heat absorption displacement device developed by my company.
It can effectively prevent the vibration of equipment caused by the displacement of the pipeline.
4,Order parameters of steam muffler:

When selecting a steam muffler, the following information shall be provided as far as possible:
  1. Interface size (mm)
  2. Interface wall thickness (mm)
  3. Working pressure (MPa)
  4. Working temperature (ºC)
  5. Flow (t/h)
  6. Installation method (vertical/horizontal, ear seat/support)
  7. Connection mode (welding/flange connection)
  8. Do you need to provide a rain hat or bird net?
Annex: Noise meters for thermal power plants
Sound wavesNoise sources
130High Pressure and Above Boiler Exhaust
125High and medium pressure boiler exhaust air discharge
120Medium and low pressure boiler exhaust air, backpressure steam turbine exhaust air;Large ball grinder
115Boilers are regularly discharged
120Backpressure steam turbine backpressure exhaust air; The big blowers come in,Diesel generators
105High pressure deoxygenator exhaust steam, high and medium pressure steam turbine start to stop hydrophobic exhaust steam;
Boiler continuous discharge, large generator magnet inlet.
100Exhaust type exhaust exhaust; Steamwheel oil pump exhaust; Ventilation of large generators;
Next to a large blower
95Engine room operating layer; Large small pump room; Medium motor
90Auto room zero meter layer; Medium Water Pumping Room

Detailed Photos

Product Parameters
Mufflers for boiler installations
(swallow steam muffler, worm furnace ignition muffler, safety valve exhaust muffler, turbine exhaust muffler, etc.)
ModelFlow rateWork stressDimensionsConnection diameterWeight
(t/H) (Mpa)LDDNKg
JS 32/2.551.70--2.505802603230
JS 80/3.3020132057080165
Note: (1) A few examples of technical specifications are given for reference
(2)To order, please provide: gas medium. Pipe diameter. Working pressure. Flow rate

Company ProfileLianyungang Jiusheng Electric Power Auxiliary Machinery Co., Ltd.

a national high-tech enterprise, is located at the foot of Jinping Mountain and beside the Qiangwei River. The factory is located in Lianyungang City, Jiangsu Province, the intersection of the the Belt and Road, and the east bridgehead of the Eurasian Continental Bridge.

It is adjacent to the 5A scenic spot of Huaguo Mountain and Liu Zhizhou Sports Park.

It is 5 kilometers away from the entrance and exit of the expressway, 13 kilometers away from the airport, and 36 kilometers away from the port.

It has convenient transportation by land, sea and air.

The company was founded in 2012 with a registered capital of 51 million yuan and an area of 20,000 square meters. It has 6 standardized industrial plants, supporting office areas, living quarters and finished goods yards, with a building area of about 11,000 square meters.

Our Advantages Jiusheng Company has honed a sword for ten years, casting the soul of the enterprise with the spirit of craftsman.

Under the careful creation of Chairman Xie Qizhi, it has grown into a well-known enterprise in the domestic power auxiliary machinery industry.

It integrates the design, production and sales of electric auxiliary machinery, pressure vessels, chemical equipment and pipeline engineering installation services.

It has the qualification of designing & manufacturing
D1 and D2 level pressure vessel , and the qualificaton of GB2 and GC2 pipeline engineering installation.
It passedISO9001 international quality system,ISO14001 environmental health management system, ISO45001 occupational health management system certification in the industry, and also owns Madrid international trademark and product import and export qualification.

It has certain manufacturing experience in American standard and European standard pressure vessels and other products and has been recognized as a qualified supplier by more than 10 central enterprises in the industry, including CNNC, Sinopec, PetroChina, Huadian, Huaneng, China Resources, China Railway, China Energy Construction, China Power Construction, Guoneng, Everbright, etc.

本站曲谱部分来源于网络,仅供学习交流分享,吉他谱网不承担任何由于内容的使用所引起的争议及损失。如有侵权,可联系管理员删除处理。Article link: